How to Replace an Oven Door Gasket?

Oven Parts and Accessories | Oven Replacement Parts -PartsFPS

The foods are being cooked or baked unevenly if you have broken oven door gaskets. It is required to check for first it really needs the replacement, before you decide to replace your oven door gasket. So, to check the uneven heat production you should turn on the oven and without touching the walls of the oven, navigate your hand around the doorway of the oven.

To check for any unexpected release of heat, navigate your fingertips an inch distance from the walls of the oven. If you perceive that the heat is escaping from inside, then the gasket needs to be replaced. When you test your oven, be careful not to touch the oven door.

You will normally find the gasket at the frame of the oven, where the door normally closes. In this kind of oven, the gasket is friction-fit and can easily be replaced, where the gasket is mounted on the frame. But problem generates when the gasket is installed in between the back and front panels of the oven door in some ovens which has the door that is divided into 2.

In this type of gasket, it is advisable to have a professional hand to fix. But if you have frame-mounted oven door gasket, then PartsFPS will encourage your interest of DIY. Below we share the steps by step tips for replacing your broken oven door gasket.

Oven Parts and Accessories | Oven Replacement Parts -PartsFPS

1. Make sure about the Range and Brand of the oven

To purchase the correct type of gasket, it is vital to take note of the range and brand of oven.

2. Turn- off the Oven

For the basic safety during the installation process, turn off the oven before you start your repair work. By removing the screws, take the old gasket out of the channel that is holding it in place. Some gaskets are exceptional; they are just friction-fitted in place they are not attached to the oven via screws.

3. The Channel should be cleaned

Clean the channel by a soft moist cloth using water solution with household detergents. Make sure that any residue is left out there in the panel, so clean it well.

4. Installation of the New Gasket

Start installing the new gasket from the top of the door frame; ease the new gasket around the corners and going down unto the sides of the oven frame. By pushing the gasket ends together, end the installation along the bottom.

The last but not the last step is to check whether the new oven door gasket is working well or not. Turn on the oven and check the heat production, the even heat production assures you that you are successful in replacing the oven door gasket.

Stay tuned with PartsFPS to get more DIY tips related to your ovens! Wishing you “All The Best” for your next DIY of replacement of oven door gasket. Waiting to listen from you!